OTTER EPOXY RESIN / HARDENER is a high quality  liquid resin in 2 parts (A) and (B) system. It gives a crystal clear, beautiful, good transparency, water resistant property to table top, home decoration, art and crafts, jewellery and etc.

Benefits : • Clear Gloss • Self Levelling • Good Flexibility and Colour Retention • Non Flammable • Solvent Free • Water Resistance

How To Use : Recommended application thickness per layer :  1 to 1.5cm

Mixing Ratio (By weight)

Fast Drying:   (A) Resin  :  (B1) Hardener  =   1kg  :  0.6kg

Slow Drying:  (A) Resin  :  (B2) Hardener  =   1kg  :  0.3kg

Accurately measure both resin and hardener according to ratio, determine how much you will need to use at a time. Prepare a bowl / container, make sure is clean of dust or water. Pour (A) into the clean bowl / container and then slowly pour (B) into (A). Use chopstick or other tools to stir slowly so it would not get bubbles, scrap the sides and bottom several times during mixing. Stir for 2 to 3 minutes and let it settle down for about 5 minutes to allow air bubble to rise up if any. Bubble can be removed by using toothpicks to float up slowly and will disappear. Slowly pour into mould or surface of project. Note: You may add is OTTER water-based pigment to get a colourful finishing. 

Curing/Drying Time (room temperature 30ºC)

(A) + (B1) Fast Drying Mixture -  Touch Dry  :  3 to 4 Hours   Fully Cure  :  7 Hours Onwards

(A) + (B2) Slow Drying Mixture - Touch Dry  :  6 to 7 Hours   Fully Cure  :  10 Hours Onwards

Coverage: 1kg Mixture Covers 10 sq.ft. at 1mm Thick

Shelf Life (Unopen): 18 months

Available Pack Size : 

1kg Resin + 0.6kg Hardener (Fast Dry)1kg Resin + 0.3kg Hardener (Slow Dry)

5kg Resin + 3kg Hardener (Fast Dry)5kg Resin + 1.5kg Hardener (Slow Dry)